I'l show you here how to install worms 4 mayhem map which you downloaded in the game.

Default option

First of all, download the map you want. For example, download ThisgamedoesDragon.xan map from here
http://www.megaupload.com/?d=QT9GZI7P
After you have downloaded, extract the map using Winrar somewhere in computer ( I recommend on Desktop , so you can see it immediately)

Then copy map ( In this example , map is called ThisgamedoesDragon.xan) to Worms 4 mayhem/Data/Maps folder. ( Folder Where you Installed Worms)


Map will replace existing This game does Dragon map with downloaded one.
So, make sure you back up your old map files.
But if you want to replace other map than ThisgamedoesDragon.xan you will have to rename it to map you want to replace.
If you look in your Data/Maps folder you will see a lot of maps.

You can replace your downloaded with any of these. I marked FastFoodDino.xan. So, if you want to replace this map rename your downloaded Thisgamedoesdragon.xan to FastFoodDino.xan.and copy it to Data/Maps where you installed worms.




Now your map will replace FastFoodDino.xan map in game.
You will know if you can replace downloaded map with another one if it says that it's selectable.
UPDATE :

I will show you 3 Options by which you can add maps without replacing existing ones.

Option 1 :

In this discussion you'll find an interesting program: the map list editor. It allows you to add new maps into Worms 4 Mayhem without replacing the previous ones.
IMPORTANT: When you'll start wormsmaplist, you'll see that it is all in Russian! No problem: just press CTRL+L and open the file En.ing that is in the same folder of the wormsmaplist editor.exe! Once you've done it, close and reopen Wormsmaplisteditor again! Surprise: the program is in English




To edit map list click File->Open and select WORMS 4 MAYHEM exe. After that you will see a list of all maps(not only for multiplayer). To add new map click Edit->Add and enter the name of map. To delete map click Edit->Delete. To edit map info double click on map. You will see a window with a several textboxes. Fill them, select map file, image, scripts and press ok. When all is done click File->Save



http://files.filefront.com/W4MapListEditorrar/;13846829;/fileinfo.html

Option 2 :

How Add Map in Worms 4 list:
1. in folder data/maps/ put yourmap.xom, yourhmap.hmp, yourtexturelist.txt
2. in folder data/databanks/ put yourdata.xml
<?xml version='1.0' ?>
<xomArchive>
<xomObjects>

<XDataBank id='id-0'>
<Section>0</Section>
<UintResources href='Databank.CustomDetailBank'/>
<UintResources href='Databank.CustomTextureBank'/>
<StringResources href='Databank.MaterialFile'/>
<StringResources href='Databank.Theme'/>
<StringResources href='Databank.Theme'/>
<StringResources href='Databank.TimeOfDay'/>
<StringResources href='Heightmap.BaseTexture'/>
<StringResources href='Heightmap.SecondTexture'/>
</XDataBank>

<XUintResourceDetails id='Databank.CustomDetailBank'>
<Value>1</Value>
<Name>Databank.CustomDetailBank</Name>
<Flags>72</Flags>
</XUintResourceDetails>

<XUintResourceDetails id='Databank.CustomTextureBank'>
<Value>6</Value>
<Name>Databank.CustomTextureBank</Name>
<Flags>72</Flags>
</XUintResourceDetails>

<XStringResourceDetails id='Databank.MaterialFile'>
<Value>Maps\yourtexturelist.txt</Value>
<Name>Databank.MaterialFile</Name>
<Flags>64</Flags>
</XStringResourceDetails>

<XStringResourceDetails id='Databank.Theme'>
<Value>BUILDING</Value>
<Name>Databank.Theme</Name>
<Flags>64</Flags>
</XStringResourceDetails>

<XStringResourceDetails id='Databank.TimeOfDay'>
<Value>NIGHT</Value>
<Flags>64</Flags>
</XStringResourceDetails>

<XStringResourceDetails id='Heightmap.BaseTexture'>
<Value>C01</Value>
<Name>Heightmap.BaseTexture</Name>
<Flags>64</Flags>
</XStringResourceDetails>

<XStringResourceDetails id='Heightmap.SecondTexture'>
<Value>C03</Value>
<Name>Heightmap.SecondTexture</Name>
<Flags>64</Flags>
</XStringResourceDetails>

</xomObjects>
3. change scripts.xml file in folder data/Tweak
<?xml version='1.0' ?>
<xomArchive>
<xomObjects>
<XDataBank id='id-0'>
<Section>0</Section>
...
<ContainerResources href='yourIDMAP'/>
<StringResources href='txt.yourMapName'/>
...
</XDataBank>
...
<XContainerResourceDetails id='yourIDMAP'>
<Value href='yourMapID-0'/>
<Name>YourMapName</Name>
<Flags>80</Flags>
</XContainerResourceDetails>

<WXFE_LevelDetails id='yourMapID-0'>
<Frontend_Name>txt.yourMapName</Frontend_Name>
<Frontend_Briefing></Frontend_Briefing>
<Frontend_Image>YourIcon.tga</Frontend_Image>
<Level_ScriptName>stdvs,wormpot</Level_ScriptName>
<Level_FileName>YourFileBaseName</Level_FileName>
<Objectives></Objectives>
<Level_Number>6</Level_Number>
<Level_Type>0</Level_Type>
<Lock></Lock>
<Theme_Type>5</Theme_Type>
<Preview_Type>0</Preview_Type>
<BonusTime>165</BonusTime>
</WXFE_LevelDetails>

<XStringResourceDetails id='txt.yourMapName'>
<Value>YourMapName</Value>
<Name>txt.yourMapName</Name>
<Flags>64</Flags>
</XStringResourceDetails>
...
It should work, good luck!!!

Use this method with Worms 4 Map launcher from Alex Bond, located here
http://www.worms4tweaks.com/worms-4-mayhem-f1/w4maplauncher-v1085-launcher-worms-3d-maps-for-worms4-t29.htm

Option 3 :

Use gerichs map pack launcher and map pack editor to create map packs and load them with special launcher.
Find them here http://www.worms4tweaks.com/worms-4-mayhem-f1/gerichs-map-packs-t60.htm

First install both applications.
Use map pack editor to create your map pack. Picture below shows how you should do it. After you have done it, press File - Save map pack.
Save .exe file in Worms 4 Mayhem folder (recommended) and program will automatically create.mpl file in its installation directory.
Default one is C:\Program Files\W4MapPackEditor\iscc\maplists .
Next, open map pack launcher and select .mpl file of your map pack.
And yeah, play the game.

See pictures below for more info.




If you have questions feel free to post them here and we will help.

How to create images for your new maps coming soon !

Actually, there is another way you can add your maps besides replacing, I think it has something to do with the scripts file in the tweak folder, I'm not sure how to set everything up in the file though, if I do eventually find out, I'll post something on it.

_________________________________________________________________________________________________________________________________

As requested by Dzani here is a tutorial on how to make a hmap

1st off to even do a height map even for your own map you need to open one already made.
(you can copy and paste carpet capers for your map because it is completely blank)
So open your map or a map you want to change then in the file drop down menu click open height map.


Height maps are located in you data/maps folder. For this tutorial I will choose the map Rob In the Hood.


Before I forget you should also have the water turned on so you can see the water level.


Once you open it and you have the textures loaded you might see the textures aren't right, thats alright, it is normal because the editor doesn't show some textures right. Like shown here for me.


Now if you didn't select anything you should have this on the side (if you did deselect it you can always reselect it).


If you are doing a map already done, in the height map drop down in the picture above go to import because the contrast on export is 100 and will look like this

You don't want that, you want the contrast set to 0. After changing the contrast to 100 press the print screen button on your keyboard. (for those who don't know print screen takes a snapshot of your screen and puts it in the clipboard)


Now go edit the picture, you can use mspaint for this but I prefer Paint.net. The hmap picture only uses grayscale so if you use colors it will convert to grayscale. Ok, when your done press the button that says open image and select your height map image. And then put the contrast back to 0. If you use paint.net you can put blur beforehand so then the slopes will be even smother. This is my changes.


You can change the max and min values, but if I remember if you put the max value to high you start walking in the ground as in, walking under the surface of the height map. The max value is for white and min value is for black. I put my max value to 0.900 and my min to 0.100 I get this my final result.

Oh and the reason why the height map is a different texture now then from the beginning is because I closed the program and opened it back up.

Here is the download link for paint.net if you want it but don't have it.

I updated Map install tutorial with option for adding maps without replacing existing. Check it : )

For the box that says Theme Type(number), which # is for which theme.

And the E isn't red in the word update

Question,
So i got both the 250 maps and the alex bond launcher. To add the 250 maps how do i do so? You wrote how but the only files in the 250 pack folder are xan and text (you didnt list anything about those).

Thank you

.xan files are map files and .txt ( text) files are actually textures. If hmp is not located in 250 map pack, then it is not needed probably.
Just follow option 2. It is a bit tricky, it would be a lot easier if you used Gerichs map launcher. Anyway, if you have more questions post.

Thanks for the reply. is there a limit to the amount of maps per pack the game will read? And also, how do you go about saving the format to mpl so the the Gerich map launcher loads them? The format feature doesnt have mpl as a save as format.

does anyone know any info about the post above for those who used this? Not sure how active this forum is but if anyone has any info on that would be awesome. would love to be able to play the maps.

In option 3, Gerichs map pack you can use only 89 maps.
When you are done in Gerichs map pack select File - Save Map pack. Save .exe file somewhere and program will automatically create .mpl
file in C:\Program Files\W4MapPackEditor\iscc\maplists ( that is default directory ) - or other directory depending where you installed it.

However, in option 2 you can create as much maps as you want.

Thanks again for the help. So I found out that it saves both an exe and mpl (which i did not find earlier). However, when I go to the launcher, and it shows both the standart one and the new one i made, when i chose the new one, it opens the alex bond settings instead with those 85 maps and not the mpl i created. Is there something I am missing in between?

anyone tried to play the 250 map pack? how do you go about doing so? still having the issue with the previous post.
thanks in advance

Yhassine, sorry that we still haven't resolved this issue. I am currently on vocation, so I am not spending much time on internet and I don't have all the files I need. Anyway, I'll check it when I get back. I will also contact the author of program and ask him to post tutorial here. Thanks

hey i downloaded the programm for option 1 but how do i add a new map??
it only says press edit and enter new map name but which name??
wheere do i have to put my downloaded maps??
plz help me and sorry for my bad english

Use default option ( the first one in post ) and it shows you have to install downloaded maps.
Options 1, 2 and 3 are a bit tricky but with them you can add maps without replacing existing ones.
But anyway, just try default option and feel free to ask more questions if you have them.

Very nice forum!!!

I have installed W4map launcher with W3D v.1.085 by alexbond. it's fantastic BUT i ha ve a problem.

Names of players are flickering and this bug is very annoying.

Anyone can help me?